To Next PageTo Next PageWhat to do if there are objects obstructing the field of view of Inxpect ISC-B01 Safety Equipment?
If objects are obstructing the view of your Inxpect Safety Equipment, the suggested solution is to remove the object if possible. If removing the object is not an option, implement additional safety measures in the area where the object is present.
General| Brand | Inxpect |
|---|---|
| Model | ISC-B01 |
| Category | Safety Equipment |
| Language | English |
Covers safety messages, symbols, personnel skills, and safety assessment.
Defines detection fields, their parameters, and dependency settings.
Classifies system safety degree and configurations for PL d category 2 and 3.
Details safety working modes and their composed safety functions.
Explains the 'Both' mode combining access detection and restart prevention.
Details the 'Always access detection' mode and its TOFF parameter.
Explains the 'Always restart prevention' mode and its characteristics.
Details types of fields of view, their dimensions, and areas.
Provides formulas for calculating dangerous area based on sensor height and inclination.
Presents configurations and formulas for sensor height up to 1 meter.
Guides on installing control unit, defining area, and configuring I/O.
Explains validation process for access detection and restart prevention.
Provides guidance on control unit and sensor LED errors and general troubleshooting.
