Contents
Glossary of terms iv
1. This manual 6
1.1 Information on this manual 6
2. Safety 8
2.1 Safety information 8
2.2 Conformity 10
2.3 National restrictions 14
3. Get to know LBK System Series 16
3.1 LBK System Series 16
3.2 LBK System Series control units 18
3.3 LBK-S01 sensors 24
3.4 Inxpect Safety application 24
3.5 Fieldbus communication 26
3.6 Modbus communication 27
3.7 System configuration 28
4. Functioning principles 31
4.1 Sensor functioning principles 31
4.2 Detection fields 32
4.3 System category (according to EN ISO 13849) 33
4.4 Safety working modes and safety functions 35
4.5 Safety working mode: Both (default) 40
4.6 Safety working mode: Always access detection 41
4.7 Safety working mode: Always restart prevention 41
4.8 Features of the restart prevention function 42
4.9 Muting 44
4.10 Anti-tampering functions:anti-rotation around axes 45
4.11 Anti-tampering functions:anti-masking 46
4.12 Multi-control unit Synchronization 47
5. Sensor position 52
5.1 Basic concepts 52
5.2 Sensor field of view 53
5.3 Dangerous area calculation 54
5.4 Calculation of position for sensor height ≤ 1 m 56
5.5 Calculation of position for sensor height > 1 m 60
5.6 Outdoor installations 61
6. Installation and use procedures 63
6.1 Before installation 63
6.2 Install and configure LBK System Series 64
6.3 Validate the safety functions 68
6.4 Manage the configuration 71
6.5 Other functions 72
7. Maintenance and troubleshooting 73
7.1 Troubleshooting 73
7.2 Event log management 76
7.3 INFOevents 80
7.4 ERRORevents (control unit) 82
7.5 ERRORevents (sensor) 84
7.6 ERRORevents (CANbus) 85
7.7 Cleaning and spare parts 85
8. Technical references 86
8.1 Technical data 87
8.2 Terminal blocks and connector pin-outs 89
8.3 Electrical connections 91
8.4 Parameters 99
8.5 Digital input signals 101
9. Appendix 106
9.1 System software 106
9.2 Disposal 107
9.3 Service and warranty 107
LBK System Series| Instruction manual v1.2 SET 2021|SAF-UM-LBKBus-en-v1.2|© 2020-2021 Inxpect SpA
iii
To Next Page
Loading...
Need help?
General
