58
LBK System| Instruction manual v1.3 SEP 2019 |LBK-System_instructions_en v1.3|© 2018-2019 Inxpect SpA
8.5.3 Install firmware updates
WARNING! LBK System is not disabled during the firmware update. Make sure that the machinery
is in safe conditions before installing updates.
NOTICE: the sensor and controller firmware must be updated to the same version.
Note: this procedure is valid for firmware versions prior to 1.80.
1. Start the Inxpect Safety application.
2. First, click Settings and then General.
3. Click the button for the desired action and select the previously downloaded update file.
4. Validate the correct functioning of the system, see "Validate safety functions" on page49.
8. Maintenance and troubleshooting
To Next Page
Loading...
Need help?
General
