To Next Page

To Previous Page

Step 5

Read the License Agreement and click “I Agree” then click “Next” if you wish to continue with

thermwareupgrade.Otherwise,click“Cancel”toexit.

Step 6

ChoosethecorrectKVM*thatyouwishtoperformrmwareupgradefromthe“DeviceList”

and then click “Next” to continue. Then the Firmware Upgrade Utility will verify if there is a

KVMconnectedtothecomputerbythermwareupgradecable.(CheckFirmwareVersion

checkbox is optional)

Step 7

If you have checked the “Check Firmware Version” checkbox, then the utility will check the

currentrmwarethatisonyourKVM.Ifthecurrentrmwareisnewerthanthermwarethat

you wish to upgrade to, a window will popup and prompt you to ask if you wish to proceed.

Simplyclick“Yes”tostarttheupgradeand“No”tocanceltheupgrade.

Note: If you did not check the “Check

Firmware Version” checkbox, utility will

perform the upgrade automatically no

matterwhatversionofrmwareyouhavein

the KVM.

IOGear 8-Port DVI KVMP Switch User Manual

Questions and Answers: