IOGear 8-Port DVI KVMP Switch User Manual

Step 1
Remove the screws from the left and right sides of the switch (2 screws total) near the front
of the switch.
8-Port USB DVI KVM Switch
AUTO SCAN
K/M RESET
1
2
3
4
5
6
7
8
6
Foot Pad Set Installation
FliptheKVMswitchupsidedown.Peeltheprotectivelmsoffofthefootpads,thenstickthe
pads to the four corners, as shown in the diagram below.
Rack Mounting

IOGear 8-Port DVI KVMP Switch Specifications

General

Brand	IOGear
Model	8-Port DVI KVMP Switch
Category	Switch
Language	English