IOGear GCS1902 - Starting and Managing Firmware Upgrade

23
Starting Firmware Upgrade
1. Run the downloaded Firmware Upgrade Package le – either by double clicking the le
icon, or using a command line to enter the full path.
2. The Firmware Upgrade Utility
Welcome screen appears.
3. Read the License Agreement and click
“I Agree” button and click “Next” .
4. The Firmware Upgrade Utility main
screen appears. The Utility inspects
your installation. All the devices
capable of being upgraded by the
package are listed in the Device List
panel.
5. As you select a device from the list,
the device’s description appears in the
Device Description panel. After you
have made your device selection(s),
Click “Next” to perform the upgrade.