Iomega ZIP 100 User Manual

Getting Started
5
If you are installing to an iMac:
a. Insert the IomegaWare
TM
software CD into the CD-ROM drive.
b. Double click the Installer icon in the IomegaWare
window (icon shown at right).
(If you can’t see the IomegaWare window, double click the CD
icon on your iMac desktop.)
c. Follow the instructions on the screen.
M iMac Users: Make sure the CD is pushed all the way down on the
CD-ROM spindle. M
If you are installing to a PC computer:
a. Close all open applications.
b. Place the IomegaWare CD into the CD-ROM drive.
The Iomega setup program should start automatically.
If it does not, follow these steps:
c. Double click the CD drive letter (usually D: or E:).
d. Double click Setup.exe (icon shown at right).
e. Follow the screen instructions to install the software.
f. During installation, some files may be updated, therefore, your
system may need to be restarted. If this is the case, setup will
automatically reboot when you click OK.

Iomega ZIP 100 Specifications

General

Capacity	100 MB
Media Type	Zip Disk
Form Factor	3.5-inch
Average Seek Time	29 ms
Average Latency	8.33 ms
Average Rotational Latency	8.33 ms
Weight	1.1 lbs
Interface	SCSI, Parallel
Data Transfer Rate	Up to 1.4 MB/s
Drive Type	Removable