Iomega ZIP 100 User Manual

Getting Started
8
How to Install Without a CD-ROM Drive
If you need to install or use your Zip
®
drive on a computer that does
not have a CD-ROM drive, you can download Iomega software from
the Internet.
Download Software from the Iomega Web Site
Contact Iomega’s web site for the latest version of Iomega software. All
components of the IomegaWare
™
software package can be downloaded.
1. Contact the Iomega Web site at http://www.iomega.com.
2. Click on Software Download to find the Iomega software for
your system.
Create Install Floppy Diskettes (for PC only)
If you have access to a computer that has a CD-ROM drive, you can
create floppy diskettes for installing the necessary driver software:
1. Insert a blank floppy diskette into the computer’s floppy drive.
2. Insert the IomegaWare
™
CD into the CD-ROM drive.
3. Open My Computer or Windows Explorer, right click on the
icon for the IomegaWare CD, and select Explore from the
shortcut menu.
4. Double click on the Diskette icon and follow
the screen instructions.
5. To install software drivers for your Zip drive, run
setup.exe from the install diskette you have created.
M NOTE: The floppy install diskette can only be used on a PC. The
install diskette includes only the driver software required to provide
access to the Zip drive, not the complete Iomega software package.
You can download all components of the software package from
Iomega’s web site. M

Iomega ZIP 100 Specifications

General

Capacity	100 MB
Media Type	Zip Disk
Form Factor	3.5-inch
Average Seek Time	29 ms
Average Latency	8.33 ms
Average Rotational Latency	8.33 ms
Weight	1.1 lbs
Interface	SCSI, Parallel
Data Transfer Rate	Up to 1.4 MB/s
Drive Type	Removable