Use the included micro-USB cable to connect the unit to a power adapter connected to a power outlet and let it
charge for up to 5 hours. This helps ensure the longest life for your battery.
Box Contents
Bright MaxTM
Micro-USB Cable (3 ft. / 100 cm)
Quickstart Guide
Support
For the latest information about this product (documentation, technical specifications, system requirements,
compatibility information, etc.) and product registration, visit ionaudio.com.
For additional product support, visit ionaudio.com/support.
Outdoor Use and Care
Though Bright MaxTM is water-resistant and able to tolerate splashing water, please review the tips below to get the
best performance from Bright MaxTM:
Bright MaxTM must only be used outdoors with power outlets or extension cords that are rated for outdoor use.
Bring Bright MaxTM indoors during extreme weather.
Please do not place Bright MaxTM in standing water.
Please do not connect the power adapter to Bright MaxTM in a wet environment. Make sure the power input,
power adapter, and power outlet are all completely dry before making any connections.
WARNING: Keep any non-water-resistant devices (phones, music players, etc.) in a dry place where they will
not be affected by water and cause a risk of electric shock.
Features
Top Panel
Power Button: Press and hold to turn Bright MaxTM on and off.
Double-press to disable or enable voice prompts.
Note: Bright Max
TH
will automatically power off after 15 minutes if no audio is playing.
Bluetooth Button: Press and hold to disconnect a Bluetooth device.
Double-press to enter Bright Max
TH
Multi-Sync
TH
mode. See Bluetooth Connecting with Bright Max
TH
to
learn how to connect via Bluetooth and sync multiple compatible speakers.
Ambient Sounds Button: Press this button to enter Ambient Sounds mode.
When enabled, press the Play/Pause button to play or pause the ambient sounds.
Press the </> buttons to cycle between ambient sounds.
To exit Ambient Sounds mode, either press this button again or press the Bluetooth button to return to Bluetooth
mode.
Lights Button: Press this button to cycle between light modes. Press and hold this button to freeze on a
color during color cycling mode.
– / + Volume Buttons: Press these buttons to decrease or increase the speaker volume.
< / > Track Buttons: Press these buttons to go to the previous/next track on a Bluetooth connected device.
Play/Pause Button: Press this button to play or pause on a connected Bluetooth device.
Rear Panel
Aux In: This stereo 1/8” (3.5 mm) input can be used to connect a CD player, MP3 player, or other audio source.
Micro-USB Speaker Charging Port: For fastest charging, power off Bright MaxTM and use the included micro-
USB cable to connect the speaker to (A) a USB power adapter (DC 5V, not included) connected to a power
To Next Page
Loading...
Need help?
General
