ION Audio Game Day™
Primetime User Guide 19
I
f the unit is not charging: Make sure the USB-C® charging cable is properly connected to the
power input, the power adapter, and the power outlet.
I
f the sound is distorted: Try lowering the volume control of your sound source.
I
f there is too much bass: Try adjusting the tone or EQ control on your sound source or on
Game Day
TM
Primetime to lower the bass level. This will allow you to play the music louder
before clipping (distortion) occurs. You can also check to make sure the BOOM function is o.
I
f you cannot connect your audio device to Game Day
TM
Primetime via Bluetooth:
• Have your audio device (e.g., smartphone or tablet) and Game Day
TM
Primetime as close
together as possible while trying to connect. Make sure both the audio device and Game
Day
TM
Primetime are unobstructed by walls, furniture, etc.
• Double-press the Bluetooth button to disconnect Game Day
TM
Primetime from any other
audio device and restart the search process. If this does not work right away, power o
Game Day
TM
Primetime and then power it back on. See Operation > Bluetooth Connecting
w
ith Game Day
TM
Primetime for more information.
• Reset the Bluetooth connection on your audio device by turning Bluetooth o and back
on. You can find this under the Bluetooth menu in the Settings for your phone or other
audio device.
If this does not work, and you have connected to Game Day
TM
Primetime before, find Game
Day
TM
Primetime in the list of available or previously connected devices in your audio
device's Bluetooth menu, tap the "gear" or “i” icon located next to it and then select U
npair
or F
orget. Turn Game Day
TM
Primetime o and back on and try pairing again once it
reappears in your available devices list.
Note: If Game Day
TM
Primetime has been paired to another audio device recently that is
still within range, you may need to repeat this process with that audio device to fully
disconnect.
I
f you experience audio dropouts while playing music from a Bluetooth device, this may be
happening because your unit is trying to link to another speaker. This can occur if you power
o a speaker that was linked to your unit or if you have just turned on your unit and it is in
Stereo-Link
TM
mode. To stop the audio dropouts, exit Stereo-Link
TM
mode by double pressing
the S
tereo-Link
TM
/ Repeat button. Alternatively, you can wait for your unit to link to another
speaker if there is one within range.
TROUBLESHOOTING