Ionic Pro ELITE TA740 - Cleaning and Maintenance

7
CLEAN FILTER LIGHT
If the unit has not been regularly cleaned and an excessive
amount of dirt has collected on the permanent ionic lter,
the unit will shut down and the blue light will turn on. This
light will turn on every 8 weeks to remind you to clean the
lter. Simply clean the permanent ionic lter by following
the “CLEANING & MAINTENANCE” section of this manual
and when complete, press the ON/OFF and MODE buttons
together to reset.
CLEANING THE IONIZER
For maximum performance we recommend that you clean
the ionizer each time you clean the Permanent Ionic Filter.
Locate the Ionizing cleaning switch on the front grill of the
Ionic Pro® Elite. See Figure 3.
Push the rod towards the center of the grill. The rod will
move about 0.5 inch forward before it will come to a stop.
Release the rod. Repeat this 2 to 3 times.
CLEANING & MAINTENANCE
If you hear excessive noise or static coming from your Ionic
Pro® Elite it generally indicates that the product needs to be cleaned. Turn o your
Ionic Pro® Elite, unplug the cord and carefully follow the cleaning instructions in
the “CLEANING & MAINTENANCE” section of this manual.
Keep the Ionic Pro® Elite functioning properly by cleaning the permanent ionic
lter and pre-lter after every 8 weeks of use as recommended. More frequent
cleaning will be necessary if the unit is located in an area with a high level of
airborne contaminants (excessive amounts of smoke, pet dander, etc.).
Exposing the Ionic Pro® Elite to candle, oil lamp, replace soot, and smoke is not
recommended and will require the collection blade assembly and pre-lter to be
cleaned more frequently.
HELPFUL TIP: If your unit doesn’t work and the CLEAN FILTER light is on,
it’s time to clean the lters.
CLEANING AND MAINTENANCE
Figure 3