Ionic Pro ELITE TA740 - Preparing to Clean

8
TA74 0
PREPARING TO CLEAN:
1. Turn o and unplug your Ionic Pro® Elite and let it rest for 60 seconds.
2. Remove the permanent ionic lter by taking hold of the handle
and lifting upwards. See Figure 4.
3. After removing the permanent ionic lter from the unit, immediately discharge
residual electricity by touching blades to an electrical ground such as a water
pipe or metal faucet.
4. Remove the pre-lter from the ESP cell. See Figure 7.
CLEANING AND MAINTENANCE
Figure 4