iOptron iMate User Manual

3
1. iOptron iMate Overview
The iMate is a single-board computer that features a powerful 64-bit ARM processor with Wi-Fi,
preloaded KStars planetarium software, Ekos control and automation tool, and INDI drivers. This hardware-
software combination will support the use of most current and future devices (cameras, focusers, filter wheels,
etc.) allowing the user to choose a brand and model.
With 32Gb eMMC storage along with a slot for up to 64Gb TF (micro SD) memory, iMate has the ability
to control and capture an entire automated imaging session. The iMate is cross-platform; use it with Windows,
IOS, Linux, Android, etc.
Features:
 Orange Pi 3 LTS with 64-bit ARM processor, 2GB LPDDR3 SDRAM and 32GB EMMC flash memory
 1X USB3.0 and 2X USB2.0 ports
 3X 12VDC outputs (2 programmable)
 Up to 64Gb high speed MicroSD card (class 10 or higher)
 Open Source Architecture
 Preloaded KStarts/Ekos/INDI driver for mount, camera, focuser and other device control
 iPolarServ for iOS and Android polar alignment
 Windows, MacOS, iOS, Linux, Android remote connection to iMate via WIFI network
Shipping Contents:
 1X iMate with WIFI antenna and dovetail mounting bar
 1X 5521 0.5 meter 90° DC cable
 1X 5521 1 meter DC cable
 1X wire wrap

iOptron iMate Specifications

General

Brand	iOptron
Model	iMate
Category	Control Unit
Language	English