64
Tip: The AC is not a DNS proxy server when no WAN interface is created. In this example, the primary
DNS address is the LAN IP address of the router connected to the internet (Router2).
3. Configure the DHCP server used to communicate with the Router1
1) Click Add.
2) Configure the parameters in the window.
VLAN Interface: Select the configured VLAN interface from Step 1, which is "default".
IP Address: Set an IP address for the VLAN interface that is on the network segment of the LAN
IP address of Router1, such as "192.168.100.1".
Subnet Mask: You can keep the default value.
3) Click Save.
To Next Page
Loading...