81
Step 2: Configure Interface and DHCP Server
1. Log in to the web UI of the AC and go to Network Setting > Network Setting > Interface and
DHCP Server.
2. Click Add.
3. Configure the parameters in the window.
VLAN Interface: Select the configured VLAN interface from Step 1, which is "vlan6".
IP Address: Set an IP address for the VLAN interface, such as "192.168.6.1".
Subnet Mask: You can keep the default value.
DHCP Server: Select "Enable".
Assign IP to: Select "User".
Remark: Set a name for the DHCP server, such as "user".
Gateway: Enter the IP address of the VLAN interface, which is "192.168.6.1".
Primary DNS: Enter the DNS server address or DNS proxy server address. In this example, it is
"192.168.200.100".
Start IP: Enter the start IP address of the DHCP address pool, such as "192.168.6.100".
End IP: Enter the end IP address of the DHCP address pool, such as "192.168.6.200".
4. Click Save.
To Next Page
Loading...