iPA SMART MUTT 9007M - General Controls and Operations; 6.1 Initial Startup and Shutdown

13
PART 6: GENERAL CONTROLS AND OPERATIONS
6.1 INITIAL STARTUP AND SHUTDOWN
All functions of the MUTT require the Power Source Switch to be in BATTERY or
EXTERNAL position.
POWERING UP
1. Push the Power Source Switch to BATTERY or EXTERNAL.
POWERING DOWN
1. Prior to shutting down return all air control switches to the CLOSED position.
2. Push the Power Source Switch to the OFF position.
0
DC
AMPERES
30
1
0
2
0
Set Power Source to BATTERY or EXTERNAL
0
DC
AMPERES
30
1
0
2
0
Set Power Source to OFF