3
TABLE OF CONTENTS
PART 1: IMPORTANT SAFETY INSTRUCTIONS 4
PART 2: WHAT’S INCLUDED 7
PART 3: CONTROLS AND PANELS 8
3.1 Left and Right Side Panels 8
3.2 Electrical Control Panel 9
PART 4: SETUP 10
4.1 Choosing a Battery 10
4.2 Axle and Wheel Installation 11
PART 5: PRETESTING CHECKLIST 12
5.1 Cable Testing Procedure 12
PART 6: GENERAL CONTROLS & OPERATION 13
6.1 Initial Startup and Shutdown 13
6.2 Auto Shutdown Feature 14
6.3 Using the 3-Button Remote Control 14
6.4 Using the 12-Button Remote Control 14
PART 7: ELECTRICAL/LIGHTING TESTING 15
7.1 Selecting a Circuit 15
Auto-Cycle Mode 15
7.2 Ground Integrity Test 16
Establishing a Solid Ground 16
7.3 Fault Indication 17
Open Circuit 17
Crossed Circuits 17
Short/Overloaded Circuit 18
7.4 Activating Hazard Lights 19
7.5 All Circuits On (Override) Mode 20
PART 8: ABS BLINK CODE DIAGNOSTICS 21
8.1 Meritor/WABCO Blink Codes 22
8.2 Haldex Blink Codes 23
8.3 Bendix Blink Codes 28
PART 9: TYPICAL TRAILER WIRING 31
PART 10: MAINTENANCE AND STORAGE 32
PART 11: ADDITIONAL TESTING PROCEDURES 32
PART 12: OPTIONAL ACCESSORIES AND
RELATED PRODUCTS 33
To Next Page
Loading...
