Need help?Do you have a question about the iPA SMART MUTT 9007M and is the answer not in the manual?
General| Brand | iPA |
|---|---|
| Model | SMART MUTT 9007M |
| Category | Test Equipment |
| Language | English |
Indicates a hazardous situation that will result in death or serious injury if not avoided.
Indicates a hazardous situation that could result in death or serious injury if not avoided.
Indicates a hazardous situation that may result in minor or major injury if not avoided.
Explains the meaning and potential hazards associated with safety alert symbols used in the manual.
Lists the specific components and accessories included with the MUTT tester.
Details the inputs and outputs located on the left and right side panels of the MUTT.
Explains the functions of the various controls, indicators, and switches on the MUTT's main control panel.
Provides guidance on selecting the correct type and specifications for the MUTT's battery.
Details the procedure for installing the axles and wheels onto the MUTT unit.
Instructions for properly positioning the MUTT tester and chocking trailer wheels before use.
Guidance on using dielectric grease and ensuring clean, proper connections for accurate readings.
Steps for testing 7-way round pin cables for continuity using the MUTT's feature.
Explains the correct procedures for powering the MUTT unit on and off.
Describes the MUTT's automatic power-down function after a period of inactivity.
Instructions on how to operate the MUTT using the included 3-button wireless remote.
Steps to program the 12-button remote control for use with the MUTT.
Explains methods for selecting specific electrical circuits for testing via manual or remote control.
Details the automatic ground integrity check performed by the MUTT and how to establish a chassis ground.
Explains how the MUTT indicates circuit faults like open circuits and crossed circuits.
Describes how the MUTT detects and responds to short circuits or overloads, including Pulsar Mode.
Instructions for activating trailer hazard lights manually via the Hazard Switch or with the remote control.
Explains how to activate all circuits simultaneously for testing, and its limitations.
Guides users on how to retrieve ABS fault codes from trailer ECUs using the MUTT.
Provides a chart of blink codes and their corresponding problem areas for Meritor/Wabco ABS systems.
Lists modes and sequences for accessing Haldex ABS blink codes and fault descriptions.
Details fault codes related to wheel speed sensors, their possible causes, and diagnostic actions.
Explains fault codes that occur only when the vehicle is stationary, related to auxiliary channels.
Covers fault codes for slow wheel recovery and issues with hold/dump solenoids.
Details fault codes for output leakage, voltage issues, and ABS ECU memory errors.
Outlines modes and sequences for accessing Bendix ABS blink codes and their fault descriptions.
Details Bendix fault codes for sensor configuration errors and power supply issues.
Explains Bendix fault codes related to ECU internal errors, configuration, and ABS indicator lamp issues.
Illustrates typical trailer wiring configurations for various connector types (6-way, 7-way, 4/5-pin).
Provides instructions for cleaning and maintaining the MUTT unit.
Guidance on preparing the MUTT for long-term storage, including battery removal.
Lists and describes various optional accessories and related products available for the MUTT.
Outlines the terms, coverage, and procedures for the product's limited three-year warranty.
To Next Page
