What to do if I get a warning that the battery is almost flat on my IPC Eagle 1050?
If you receive a warning that the battery is almost flat on your IPC Eagle Floor Machine, it simply means you need to charge the battery. No other intervention is required.
How to troubleshoot traction issues on my IPC Eagle 1050 Floor Machine?
If your IPC Eagle Floor Machine's traction is blocked, take the following steps: * Let the engine cool down for 20 minutes. * Make sure the cooling fan is working correctly. * Check that the brake isn't blocked. * Confirm the traction wheel spins freely. If the atmospheric temperature is high, stop the machine for 20 minutes before restarting. If the problem continues, call the service center.
General| Category | Floor Machine |
|---|---|
| Voltage | 24 V |
| Cleaning Path | 20 inches |
| Power Source | Battery |
| Working Width | 20 inches |
Rules to prevent damage and bodily harm, including temperature, usage, and cleaning guidelines.
Emphasizes user responsibility and cooperation for accident prevention.
Step-by-step guide on how to turn on the machine using the ignition key.
Instructions for starting and stopping the petrol engine.
Explains the function and restart procedure for the emergency stop button.
Guide on checking electrolyte levels and recharging batteries.
Instructions for checking, topping up, and replacing engine oil.
Summary table of maintenance checks and intervals for the battery version.
Summary table of maintenance checks and intervals for the dual power (petrol) version.
Table detailing security codes, machine behaviour, error descriptions, and interventions.
Explanation of drive board alarms, status LED, and error codes.
To Next Page
