Local IP: This is the IP testers IP address.
RTSP Add: This is where you can manually enter the IP camera’s RTSP URL or click on Search to
search the network for cameras that use an RTSP stream.
IPC Username: Enter the IP camera’s user name.
IPC Password: Enter the IP camera’s password.
Once you have entered all the necessary information, select Enter at the bottom left to view the RTSP
stream.
Note: in the event the ip tester does not auto detect the rtsp stream, refer to the specific camera
manufacturer for the specific rtsp stream url. you may find this on line with a search of the
camera model number and the word rtsp.
Trace route:
Trace route is used to determine path of the IP packet access target.
Note:Trace route testing results only for reference, for accurate test route tracking,Pls use professional
Ethernet tester.
Click to enter Trace Route
Input tracking IP address or domain name in the Remote Host IP. Set maximum hop count, normally
default is 30
To Next Page
Loading...