Click “start” to trace the goal address
IP discovery
Using IP discovery app ,you don’t need to know the first two digits of camera’s IP address , it can
auto-scan the whole network segment IP, and auto-modify tester’s IP address , greatly improved
engineering efficiency .
Step 1: Connect IP camera to tester’s LAN port, if connected well, the green indicator on and yellow
indicator flashes.
Step 2: Press IP discovery , tester auto-scan the whole network segment IP, as well as
auto-modify the tester‘s IP and the scanned camera's IP at the same network segment. No need to
modify the tester’s IP manually.
To Next Page
Loading...