iPECS ES-3052GP - Page 115

C HAPTER 4 | Basic Management Tasks
Setting the System Clock
– 115 –
ES-3052 Series
◆ This configuration page sets the summer-time time zone relative to the
currently configured time zone. To specify a time corresponding to your
local time when summer time is in effect, you must indicate the number
of minutes your summer-time time zone deviates from your regular
time zone (that is, the offset).
PARAMETERS
The following parameters are displayed:
◆ Summer Time in Effect – Indicates whether or not Summer Time
settings are currently is use.
◆ Status – Enables or disables Summer Time settings.
◆ Name – Name of the timezone while Summer Time is in effect, usually
an acronym. (Range: 1-30 characters)
◆ Mode (Date) – Sets the start, end, and offset times of summer time on
a one-time basis.
■
Offset – Summer time offset from the regular time zone.
(Range: 0-99 minutes; Default: 60 minutes)
■
From – The date and time at which to start using Summer Time
settings.
■
To – The date and time at which to stop using Summer Time
settings.
WEB INTERFACE
To configure Summer Time:
1. Click System, then Time.
2. Select Configure Summer Time from the Step list.
3. Set the Status to enable or disable Summer Time.
4. Fill in the Name field.
5. Then set the offset and the start to end time range.
6. Click Apply