C
HAPTER
13
| Security Measures
Configuring HTTPS
– 313 –
C
AUTION
:
For maximum security, we recommend you obtain a unique
Secure Sockets Layer certificate at the earliest opportunity. This is because
the default certificate for the switch is not unique to the hardware you have
purchased.
When you have obtained these, place them on your TFTP server and
transfer them to the switch to replace the default (unrecognized) certificate
with an authorized one.
N
OTE
:
The switch must be reset for the new certificate to be activated. To
reset the switch, see "Resetting the System" on page 121 or type “reload”
at the command prompt: ES-3052G#
reload
CLI REFERENCES
◆ "Web Server" on page 641
PARAMETERS
These parameters are displayed in the web interface:
◆ TFTP Server IP Address
– IP address of TFTP server which contains
the certificate file.
◆ Certificate Source File Name
– Name of certificate file stored on the
TFTP server.
◆ Private Key Source File Name
– Name of private key file stored on
the TFTP server.
◆ Private Password
– Password stored in the private key file. This
password is used to verify authorization for certificate use, and is
verified when downloading the certificate to the switch.
To Next Page
Loading...
