Ipevo IW2 - Installing IW2: Wireless Receiver and Pairing; Wireless Receiver Connection and Pairing

10
Note: The adhesive sticker of ceiling mount is extremely adhesive and should only be ap-
plied once. The Sensor Cam can be detached without removing the ceiling mount. Simply
remove the Sensor Cam from the ceiling mount.
C. Use a tripod
The Sensor Cam comes with a tripod mount. Consider mounting the
Sensor Cam onto any standard tripod.
1 2
Remove the sticker
3. Ensure the mounting surface is clean and free of grit. Remove the
adhesive sticker from the bottom of the ceiling mount, and affix the
ceiling mount firmly onto the mounting surface.
Installing IW2 (cont’d)