iPower SUA7000 User Manual

Explains DANGER, WARNING, CAUTION, NOTE symbols and their meanings.

Warns about deadly CO from exhaust, use outdoors.

Alerts about California emissions and non-marine use restrictions.

Covers kickback, fuel flammability, and safe refueling practices.

Outlines risks of electrical shock and necessary safety measures.

Warns about risks from hot exhaust, gases, and moving parts.

Advises on speed limits, generator modification, and overload prevention.

Instructions for safely unpacking the generator and its contents.

Guides on assembling the generator, including the wheel kit.

Details the location and function of each control on the panel.

Instructions for filling the engine with the correct type and amount of oil.

Guidance on safely adding fuel, including fuel type and precautions.

Explains the importance and method of grounding the generator for safety.

Step-by-step instructions for starting the generator using recoil or electric start.

How to safely connect appliances and tools to the generator.

Procedures for safely shutting down the generator and disconnecting loads.

Explains the automatic shutdown feature due to low oil level.

Guidance for operating the generator at higher altitudes.

Reinforces kickback prevention during engine starting.

Provides basic checks if the engine fails to start.

Explains how circuit breakers protect against overload.

Guide to connecting loads and using the wattage reference.

Steps for properly stopping the generator after use.

Provides a schedule for regular maintenance tasks based on operating hours.

General advice on maintaining the generator and warranty requirements.

Instructions on how to clean the generator exterior and air slots.

Safety warning before performing engine maintenance.

Step-by-step guide for draining and refilling engine oil.

Instructions for removing, checking, and installing spark plugs.

How to service and clean the spark arrester.

Procedures for cleaning or replacing the air filter.

Explains how to check and adjust valve clearance for engine longevity.

Guidelines for storing the generator, including short and long-term methods.

Detailed steps for preparing the generator for extended storage.

Further advice for effective generator storage.

Addresses issues when the engine runs but no power is generated.

Solutions for the generator losing power when loads are connected.

Troubleshooting steps for failure to start, rough running, or shutdown.

Identifies causes and solutions for reduced engine power.

Fixes for the engine speed fluctuating or faltering.

Lists key specifications for different generator models.

Provides specifications for larger capacity generator models.

Detailed wiring diagram for the SUA1500 model.

Identifies key components and connections in the SUA1500 schematic.

Wiring schematic for the AP4000 portable generator model.

Details the parts and connections shown in the AP4000 schematic.

Electrical schematic for the SUA4500 generator model.

Identifies components within the SUA4500 wiring diagram.

Wiring diagram for the SUA5000 generator model.

Details the parts and connections in the SUA5000 schematic.

Electrical schematic for the SUA7000 generator model.

Identifies components within the SUA7000 wiring diagram.

Wiring diagram for the SUA9000E generator model.

Details the parts and connections in the SUA9000E schematic.

Wiring diagram for the SUA10000EC generator model.

Details the parts and connections in the SUA10000EC schematic.

Wiring diagrams for SUA12000E and SUA12000EC models.

Identifies components in the SUA12000E/EC wiring diagrams.

Details the warranty specifically for the emission control system in California.

Outlines the general warranty coverage provided by A-iPOWER.

Explains the owner's duties to maintain warranty validity.

Lists the conditions and criteria for warranty claims.

Specific list of parts covered for exhaust systems.

Parts covered for evaporative emissions for engines up to 80cc.

Parts covered for evaporative emissions for engines over 80cc.