IPU Spring Starter User Manual

P a g e | 4
Before using the Spring Starter for the first time
Before you operate the IPU SureStart Spring Starter for the first time you must complete the
following:
TO ROTATE THE ENGINE WITHOUT STARTING
1. Pull reset button
2. Wind clockwise 1¾ turns
3. Operate the trip lever
4. Continue winding
5. Operate starter for 1 complete engine revolution
The above steps ensure the Spring Starter is fitted correctly and will not cause damage to the
starter or the engine. If any of the above steps cannot be completed please contact IPU on +44
(0) 121 511 0460 for further support.
DO NOT OPERATE THE STARTER WITH ENGINE DECOMPRESSED

IPU Spring Starter Specifications

General

Brand	IPU
Model	Spring Starter
Category	Controller
Language	English