IPUX ICS2300 User Manual

- 13 -
2.2 Connecting the Camera to LAN/WLAN
 Connecting to LAN
Use the provided Ethernet cable to connect the camera to your
local area network (LAN).
When you connect the AC power adapter, the camera is powered
on automatically. You can verify the power status from the Power
LED on the front panel of the camera.
Once connected, the Link LED starts flashing green light and the
camera is on standby and ready for use now.
Connecting the Ethernet cable

IPUX ICS2300 Specifications

General

Brand	IPUX
Model	ICS2300
Category	IP Camera
Language	English