- 55 -
4.10 Tools
The Tools menu provides the commands that allow you to restart
or reset the camera. You can also backup and restore your
configuration, and upgrade the firmware for the
camera.
Factory Reset: Click Reset to restore all factory default
settings for the camera.
System Reboot: Click Reboot to restart the camera just like
turning the device off and on. The camera configuration will
be retained after rebooting.
Configuration: You can save your camera configuration as
a backup file on your computer. Whenever you want to
resume the original settings, you can restore them by
retrieving the backup file.
- Backup: Click Get the backup file to save the current
configuration of the camera.
- Restore: Click Browse to locate the backup file and then
click Restore.
To Next Page
Loading...
Need help?
General
