IPUX ICS2300 - Pan & Tilt Settings

- 39 -
4.5 Pan & Tilt Settings
The Pan/Tilt menu allows you to configure the pan/tilt functions of
the camera.
 Pan/Tilt Calibration: Click Calibration to calibrate the
position of the camera lens.
 Pan Steps: Set the changing range (1~20 degrees) when
you click the Left/Right button.
 Tilt Steps: Set the changing range (1~20 degrees) when
you click the Up/Down button.
 Auto Patrol Stay Time: Set the stay time (1~999 seconds)
of each preset positions when the camera is patrolling.
 Startup Preset: Set the position (1~8, or None) to start
patrolling.