2.2 CE Compliance
This product, when marked with the CE symbol, complies with the European Community Council Directive
for R&TTE, 99/5/EC, provided that the integrator/user adheres to the instructions detailed in this Interface
Specification. This product is in compliance with applicable ETSI standards. Compliance with the
requirements of ETSI EN 301 489 requires the use of a shielded digital data interface cable.
2.3 Canadian Compliance
The 9601 is certified under RSS-170 of the Canadian Radio standards as IC: 4629A 9601. Operation is
subject to the condition that this device does not cause harmful interference. Any changes or modifications,
including the use of a non-standard antenna, not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
3.0 Physical Specifications
For illustrative purposes a rendering of the 9601 ISU is shown in Figure 1 with a ribbon cable connector
inserted. (Note that 9601 this ribbon cable connector is to be provided by the developer and is not
supplied as part of the product.)
Figure 1: The 9601 SBD Transceiver.
3.1 Dimensions
The overall dimensions of the 9601 and its weight are summarized in Table 2 and represented graphically
in Figure 2.
Table 2: 9601 Mechanical Dimensions
Parameter Value
Length 106 mm
Width 56.2 mm
Depth 13 mm
Weight (approximate) 117g
Note that these dimensions are for the enclosure and do not take into account the connectors or mounting
hardware. Additionally developers should plan for additional space for the reciprocal connectors for the
To Next Page
Loading...
