30
4.2.1. Washing the evaporator
Wear protective gloves during the following
operations.
HOW TO ACCESS THE EVAPORATOR:
In order to clean the inside of the evaporator, use a
flat-blade screwdriver to loosen the screw located at
the right side of the fan-holding panel and turn it to the
left.
Do not use sharp objects.
METHODS FOR CLEANING EVAPORATOR
In order to clean the evaporator, a brush can be used
with a vertical movement along the direction of the
aluminium flaps.
When finished, close the fan-holding panel carrying out
the operations inversely.
Do not use high pressure water jets
To Next Page
