4.3.2 Scanning like an ADF (Automatic Document Feeder)
The IRIScan™ Executive 4 can also be used as an ADF in which you insert one sheet after the other without
having to click or press Scan every time.
1. Start the Button Manager from All Programs > IRIS Button Manager.
2. Right-click the button you want to use.
3. Select Use Twain next to Advanced Settings, and click OK to confirm.
TIP: to remove Blank pages from your scans, click the Setup button next to Use Twain. Click
the Separation tab and select Blank Page Removal Threshold. The more you move the slider
to the left, the sooner a page will be considered blank.
4. Now insert a page into the scanner and click the button you configured.
5. Once the page has been fed through a message appears informing you you have 15 seconds to
insert another page.
6. Insert the other pages you want to scan one by one.
7. When you are done scanning all your pages, click Cancel.
To Next Page
Loading...
