IRIS IRIScan Executive 4 User Manual

9
Quick User Guide – IRIScan
TM
Executive 4
4.3 Scanning with the IRIScan™ Executive 4
The IRIScan Executive 4 can be used in several ways:
• With the Button Manager to scan documents directly to Readiris for text recognition, scan them
to other applications of your choice, to multiple Cloud destinations, etc.
• From within Readiris™ or Cardiris™.
In this User Guide we only describe the basics how to scan.
Separate User Guides are available for the Button Manager, Readiris and Cardiris.
The documentation package can be found on the Technical Support section of www.irislink.com.
4.3.1 Basic Scanning
WARNING!
• Insert only one page at a time, and insert the next one only when the previous one is done. Otherwise,
the scanner may malfunction.
• The paper detector is quite sensitive. Please do not push your document into the feeding slot or the top
of your image will be cut. Simply let go the document when it begins to feed into the slot.
1. Connect the scanner to your computer using the provided USB cable.
The scanner is powered on automatically.
2. Insert your document FACE UP into the feeder and align it to the LEFT edge of the feeder.
3. Gently push the document into the feed slot.
4. Press the Scanner button once to start scanning. The document will be sent to the default
destination of the Button Manager.
Note: it takes a few seconds for the scanner to start.

IRIS IRIScan Executive 4 Specifications

General

Brand	IRIS
Model	IRIScan Executive 4
Category	Scanner
Language	English