UserManual
Model‐irisX1 29
has an active data plan and mobile data is “ON”.
USB Tethering:
Connect your mobile phone to your PC via
the USB cable.
Go to Settings> Wireless & Networks>More
>Tethering & portable hotspot> USB tethering.
Your PC will then read the necessary drivers
of your phone and you can then access internet on
your PC.
Note: In case you are unable to connect to internet
please get in touch with customer care executive.
Wi-Fi Hotspot:
Go to Settings> Wireless &
Networks>More >Tethering & portable hotspot>
Turn ON Wi-Fi Hotspot.
Once the device Wi-Fi Hotspot is active you
can see a grey icon denoting wireless network on
the notification pane.
Note: You can select the desired security settings
for your hotspot network by following below
steps:
Go to Settings> Wireless & Networks>More
>Tethering & portable hotspot> Set up Wi-Fi
hotspot> Security> Select desired security and
configure your password
Now go to your PC and check for the
Hotspot network created by your device.
Select the network and input the password
configured for the hotspot network on your
device.
To Next Page
Loading...
Need help?
General
