UserManual
Model‐irisX1 28
9.3. Connect to Wi-Fi Networks
To browse the Internet via Wi-Fi:
Go to Menu> settings> Under wireless &
networks tab select Wi-Fi and then turn it ON, select
the WIFI connection listed under Wi-Fi networks with
which you want to connect> Enter the password of
Wi-fi network with which you want to connect.
Note: Make sure that Wi-Fi network with which you
want to connect is in the range and is active.
9.4. Pair With Bluetooth Devices
Go to Settings > Wireless & networks>
Bluetooth settings.
If Bluetooth is off, check Bluetooth to turn it on.
Your phone scans and displays the Bluetooth
devices in range.
If the device you want to pair with is not in the
list, make it discoverable.
If your phone stops scanning before you make
the other device discoverable, touch Scan for
devices.
Touch the ID of the other device in the list
Settings to pair them. If you are prompted to for a
password, enter any password on one device and
enter the same password you entered in the other
device to be paired, If the pairing is successful,
your phone connects to the device.
9.5. Connect to Internet on your PC via Phone
You can browse the Internet on your PC using your
mobile phone. This can be done in 2 ways:
To access both the options make sure your phone