iRobot Scooba 230 Quick Start Guide

iRobot Scooba 230 Quick Start Guide
www.irobot.com
iRobot Scooba 230 Quick Start Guide
Scooba is designed for use on hard floor surfaces, including tile, linoleum, vinyl, marble, slate and
sealed wood. Do not use Scooba on unfinished or unsealed hard floors, stone floors, carpets, rugs or
waxed floors.
Step 1. Charge Scooba
Step 2. Prepare the room
1
1
Put in Scooba’s battery.
Sweep the floor
or run Roomba.
Plug in and charge
Scooba up to 8 hours.
(The charger flashes
twice when plugged in,
to show it has power.)
Remove clutter and area rugs in the room to be cleaned.
2
2
TIP: To extend the battery life, always store Scooba connected to a plugged-in charger.
NOTE: When Scooba is fully charged, the light on the charger is solid green.

iRobot Scooba 230 Specifications

General

Shape	Round
Product color	Black
Dust container type	Bagless
Charging time	- h
Battery voltage	- V
Battery capacity	- mAh
Battery technology	-
Package depth	204 mm
Package width	276 mm
Package height	155 mm
Package weight	1920 g
Dust capacity (total)	- L

Weight and Dimensions

Height	92 mm
Diameter	165 mm