What to do if my iRobot Vacuum Cleaner is stuck?
If your iRobot Vacuum Cleaner is stuck, first move it to a clear area and press the clean button. Additionally, ensure the cliff sensors are clean and try pressing clean again. Finally, check if the device is stuck in a Virtual Wall beam; if so, move it out of the beam and press clean.
How to fix charging error on iRobot Vacuum Cleaner?
A charging error with your iRobot Vacuum Cleaner can be resolved by disconnecting the charger from the robot, unplugging the charger from the outlet, waiting 5 seconds, plugging the charger back into the outlet, and then reconnecting the charger to the robot.
How to fix left or right wheel malfunction on iRobot Vacuum Cleaner?
To address a left or right wheel malfunction on your iRobot Vacuum Cleaner, inspect and clean the device’s wheels, then press clean.
What to do if iRobot Vacuum Cleaner has no power at outlet?
If there is no power at the outlet for your iRobot Vacuum Cleaner, confirm power is present by plugging in a lamp or another electrical device. If there is still no power, try using another electrical outlet.
Why is my iRobot Vacuum Cleaner in a pool of water with locked vacuum tubes?
If your iRobot Vacuum Cleaner is in a pool of water and the vacuum tubes are locked, the vacuum tubes may be filled with debris. Move the device out of the pooled water and press clean. You can also remove the bottom plate, clear any debris from the vacuum tubes, replace the bottom plate, set the robot in a clear area, and press clean. To prevent this issue, sweep the floor before using the device.
What to do if iRobot Vacuum Cleaner is on a cliff?
If your iRobot Vacuum Cleaner is on a cliff, it may be due to dirty cliff sensors. Move the device to a clear area away from the cliff and press clean. Alternatively, the cliff sensors may be malfunctioning. Clean the cliff sensors with a cotton swab and press clean. The cliff sensors are located in the bumper and are accessed by turning the device over. If the issue persists, contact iRobot customer care.
What to do if iRobot Vacuum Cleaner has a bumper problem?
If your iRobot Vacuum Cleaner bumper is experiencing issues, tap the bumper to ensure that it moves in and out. Also, visually inspect the bumper edges for debris and press clean.
How to refill the tank on iRobot Vacuum Cleaner?
If your iRobot Vacuum Cleaner fill tank is empty, fill the tank with water and cleaning solution, then press the clean button.
General| Shape | Round |
|---|---|
| Product color | Black |
| Dust container type | Bagless |
| Charging time | - h |
| Battery voltage | - V |
| Battery capacity | - mAh |
| Battery technology | - |
| Package depth | 204 mm |
| Package width | 276 mm |
| Package height | 155 mm |
| Package weight | 1920 g |
| Dust capacity (total) | - L |
Weight and Dimensions| Height | 92 mm |
|---|---|
| Diameter | 165 mm |
Covers general precautions for operating the Scooba robot safely.
Highlights safety rules specific to the Scooba robot's use and design.
Details essential safety measures for charging and handling the Scooba battery.
Lists prohibited uses and surfaces to avoid for optimal performance and safety.
Details the automatic washing, scrubbing, and drying functions of the Scooba.
Explains the available cleaning cycles, their durations, and recommended uses.
Guides users through inserting the battery and initial charging process.
Step-by-step instructions for setting up and running a cleaning cycle.
Guides users to identify problems using beeps, blinks, and error codes.
Provides solutions for issues related to the battery charger and its lights.
To Next Page
