C.P. SENTINEL AUTOMATIC TYPE CATHODIC PROTECTION RECTIFIER MANUAL
INTEGRATED RECTIFIER TECHNOLOGIES, INC.
Doc #: APC0010
Rev. 3.0, November, 2004
Page 4 of 22
DELIVERY INSPECTION
Although the rectifier unit may not be scheduled for immediate installation, we recommend that
it be thoroughly inspected, both externally and internally, upon receipt to ensure that no
damage has occurred during shipment. Please remember that although the outside of the
rectifier packaging may not show any signs of damage, there may be internal damage that will
not be apparent until the outer packaging is removed. Any damage, whether internal or
external, must be reported to the freight carrier immediately. If any damage has occurred
during shipment; an indication of this should made on the freight paperwork, the shipment
should then be accepted, and a claim filed with the freight carrier. Please ensure to retain the
original packaging that may indicate how the damage occurred.
If damage has occurred during shipment and repairs or a return to the factory is required,
please contact us, or your local IRT distributor, with the Serial Number and the Model Number
of the rectifier. This information is crucial for us to determine the rectifier unit in question and to
be able to provide suitable assistance. A Return Materials Authorization (RMA) number must
be obtained from the factory prior to return of any damaged rectifier units.
PRE-INSTALLATION STORAGE
If the rectifier unit is to be stored prior to installation, it is recommended that it be stored in a dry
area, preferably indoors. If the unit is to be stored outdoors for an extended period of time, it is
recommended that it be placed on a raised surface (pallet or platform) and covered with a
protective sheet or tarp to ensure the packaging does not deteriorate due to rain or snow.
Whether stored indoors or outdoors, the unit should be placed in an area where it is protected
from accidental damage from moving vehicles or equipment. Ensure that the rectifier unit is
transferred to and from the storage facility using proper handling techniques.
To Next Page
Loading...