ISA CBA2000 - 4 BREAKER AND AUXILIARY CHANNEL SETTINGS; 5 ANALOG CHANNEL;COILS SETTINGS

Doc. SIE10169 Rev. 13 Page 30 of 32
LEVEL 1
LEVEL 2
LEVEL 3
LEVEL 4
4 BREAKER AND
AUXILIARY CHANNEL
SETTINGS
1 Breaker contacts
A1;
A1+B1+C1;
all
**
2 Pre-insertion
resistor test
Enable/disable
3 Auxiliary inputs
1-2
**
Enable/disable;
Label;
Dry/wet
4 Auxiliary inputs
3-4
**
Enable/disable;
Label;
Dry/wet
5 ANALOG
CHANNEL/COILS
SETTINGS
1 Close coil range
2.5,10,25 A
2 Open coils range
2.5,10, 25 A
3 Analog input
1 Enabled
2 500 V input range,
label
500,50,5 V DC
3 Travel transducer
Label
Phase
Transducer: U.M.;
Transducer: max
stroke
Supply: 5V int, ext
Breaker: U.M.;
Breaker: stroke;
Nominal transducer
stroke
Travel transducer
calibration
Open position, %
Closed position, %
Actual tr. stroke, %
Tr. stroke error, %
Actual bk. stroke,
%
Bk. stroke error, %
Datum points
definition
Enable
From open to closed
At open position
At closed position
At CB opening
A point set-up
B point set-up
Shop for Power Metering products online at:
1.877.766.5412
www.PowerMeterStore.ca