16
VII. CLEANING
Controller: Wipe the controller surface with a dry and soft cloth.
Motor: Clean the dirt on the surface of the motor, especially the
dirt on the lead line of the motor. Avoid wading water. If the depth
of water exceeds 5 cm, water will enter the motor, which may
permanently damage the motor.
Body: The body shroud has been sprayed with a clear sealant
coating, and you can apply a light coat of car wax to help it retain
its high-gloss appearance.
Table
CHECK LIST
Check Items At any time Weekly Monthly Six monthly
All parts
Brakes
Connections
Tire wear
Motors
Battery
Charge
Turning,
Driving,
Devices, etc.
Console
devices
Clean
To Next Page
Loading...
