To Next PageTo Next Page
Need help?Do you have a question about the ISDT C4 and is the answer not in the manual?
Lists supported battery types, sizes, and operating voltage ranges.
Specifies charge/discharge current ranges and operation modes.
Connect charger, insert battery, and it automatically starts charging.
Insert battery, then manually adjust parameters via touch keys.
Insert battery, then manually adjust parameters via touch keys.
Protects against battery reversal or short circuits, showing error prompts.
Lists supported battery types, sizes, and operating voltage ranges.
Specifies charge/discharge current ranges and operation modes.
Connect charger, insert battery, and it automatically starts charging.
Insert battery, then manually adjust parameters via touch keys.
Insert battery, then manually adjust parameters via touch keys.
Protects against battery reversal or short circuits, showing error prompts.
General| Operating Temperature | 0-40°C |
|---|---|
| Firmware Upgrade | Yes |
| Output Voltage | 1-30V |
| Charge Current Range | 0.1A-3.0A |
| Discharge Current Range | 0.1A-1.0A |
| Discharge Power | Max 5W |
| Battery Types Supported | LiPo, LiFe, Li-ion, NiMH, NiCd |
| Battery Size Supported | AA, AAA, 18650, 26650 |
| Cell Count | 1-6S |
| Display | 2.4 inch LCD |
