ISDT T8 - Working Parameters Display

23
Press to check more info :
Voltage for each cell, resistance for each cell, operation status, input status, output status.
Resistance for each cell will display while charger is doing balance charging for at least 3 min.
Detail info for input/output only available while connecting with BattGo smart battery,
Working Parameters Display
Fast Charging
4.17V
4.18V
4.18V
4.18V
4.18V
4.18V
4.17V
4.18V
LiPo-8S
33.42V
A
4.96Ah
00:12:18
Charging
25.3
Cells Voltage
2.5mΩ
2.6mΩ
2.6mΩ
2.6mΩ
2.9mΩ
2.6mΩ
2.6mΩ
2.6mΩ
Cells Impedance
Working Info
31.7V/870W
3.95~3.96V
846W
59℃
289Wh
1pcs
5pcs
Input voltage and power
Operation temperature
Output Power
Finished charging PCs of batteries after boot
Finished charging PCs of batteries in grand total
Charging current
battery type&voltage
Charged energy
Task condition
Operation time
Total output energy after boot
Connected battery
support BattGo