Need help?Do you have a question about the ISDT P20 and is the answer not in the manual?
Key safety guidelines for proper and safe operation of the charger, including environmental and usage restrictions.
Identifies and labels all physical connection ports and control buttons on the device.
Explains how to use the device buttons for navigation and task selection from the standby interface.
Guide on determining safe charging current based on battery C-rate and capacity.
Details available tasks (charge, discharge, etc.) and their setup parameters.
Details on charging procedures, including balance charging and current settings.
Information on discharging batteries, including current limits.
Guidelines for battery storage charging and current settings.
Procedure for safely discharging batteries to 0V for disposal.
How to set up parallel charging/discharging for maximum power to a single battery.
How to set up identical tasks for both channels simultaneously.
Using CH1 as an adjustable DC power supply with voltage and current control.
Setting a minimum input voltage limit to protect the charger.
Configuring the maximum input power to ensure stable operation.
Reading and modifying parameters for BattGo batteries.
Enabling trickle charge after completion to maintain battery voltage.
Configuring automatic switching between single and dual channel displays.
Performing a self-test of the charger after disconnecting all batteries.
Calibrating input voltage, output voltage, and balance port voltage.
Key safety guidelines for proper and safe operation of the charger, including environmental and usage restrictions.
Identifies and labels all physical connection ports and control buttons on the device.
Explains how to use the device buttons for navigation and task selection from the standby interface.
Guide on determining safe charging current based on battery C-rate and capacity.
Steps to access and configure tasks like charge, discharge, storage, and destroy.
Details on charging procedures, including balance charging and current settings.
Information on discharging batteries, including current limits.
Guidelines for battery storage charging and current settings.
Procedure for safely discharging batteries to 0V for disposal.
Explanation of information displayed on the charging screen.
Setting up identical tasks for both channels simultaneously.
How to set up parallel charging for maximum power to a single battery.
Using CH1 as an adjustable DC power supply with voltage and current control.
Setting a minimum input voltage limit to protect the charger.
Configuring the maximum input power to ensure stable operation.
Reading and modifying parameters for BattGo batteries.
Adjusting sound levels for operation and warning beeps.
Setting the background color to bright or dark.
Enabling trickle charge after completion to maintain battery voltage.
Configuring automatic switching between single and dual channel displays.
Performing a self-test of the charger manually.
Calibrating input voltage, output voltage, and balance voltage.
Key safety guidelines for proper and safe operation of the charger, including environmental and usage restrictions.
Identifies and labels all physical connection ports and control buttons on the device.
Explains how to use the device buttons for navigation and task selection from the standby interface.
Guide on determining safe charging current based on battery C-rate and capacity.
Details available tasks (charge, discharge, etc.) and their setup parameters.
Details on charging procedures, including balance charging and current settings.
Information on discharging batteries, including current limits.
Guidelines for battery storage charging and current settings.
Procedure for safely discharging batteries to 0V for disposal.
How to set up parallel charging/discharging for maximum power to a single battery.
How to set up identical tasks for both channels simultaneously.
Using CH1 as an adjustable DC power supply with voltage and current control.
Setting a minimum input voltage limit to protect the charger.
Configuring the maximum input power to ensure stable operation.
Reading and modifying parameters for BattGo batteries.
Enabling trickle charge after completion to maintain battery voltage.
Configuring automatic switching between single and dual channel displays.
Performing a self-test of the charger after disconnecting all batteries.
Calibrating input voltage, output voltage, and balance port voltage.
Key safety guidelines for proper and safe operation of the charger, including environmental and usage restrictions.
Identifies and labels all physical connection ports and control buttons on the device.
Explains how to use the device buttons for navigation and task selection from the standby interface.
Guide on determining safe charging current based on battery C-rate and capacity.
Steps to access and configure tasks like charge, discharge, storage, and destroy.
Details on charging procedures, including balance charging and current settings.
Information on discharging batteries, including current limits.
Guidelines for battery storage charging and current settings.
Procedure for safely discharging batteries to 0V for disposal.
Explanation of information displayed on the charging screen.
Setting up identical tasks for both channels simultaneously.
How to set up parallel charging for maximum power to a single battery.
Using CH1 as an adjustable DC power supply with voltage and current control.
Setting a minimum input voltage limit to protect the charger.
Configuring the maximum input power to ensure stable operation.
Reading and modifying parameters for BattGo batteries.
Adjusting sound levels for operation and warning beeps.
Setting the background color to bright or dark.
Enabling trickle charge after completion to maintain battery voltage.
Configuring automatic switching between single and dual channel displays.
Performing a self-test of the charger manually.
Calibrating input voltage, output voltage, and balance voltage.
General| Operating Temperature | 0-40°C |
|---|---|
| Storage Temperature | -20-60°C |
| Output Voltage | DC 1-30V |
| Discharge Current | 0.1-2A |
| Balance Current | 300mA |
| Supported Battery Types | LiPo, LiFe, LiHV, NiMH, Pb |
| Cell Count | 1-6S |
| Display | 2.4-inch TFT color screen |
To Next Page
