Need help?Do you have a question about the ISDT 608AC and is the answer not in the manual?
Details the functions of the shuttle key: long press for settings/terminate, short press for task/confirm, scroll for menu.
Table showing default voltage and current parameters for various battery types like LiFe, LiPo, NiMH.
Explains how to use the 'Scrapped function' to discharge a battery to 0V.
Describes the DC Power function, acting as a power supply with adjustable voltage and current.
Explains minimum input voltage protection (10-24V) and its behavior in AC/DC modes.
Describes maximum input power setting (30-230W) for stable operation in DC mode.
Details the functions of the shuttle key: long press for settings/terminate, short press for task/confirm, scroll for menu.
Table showing default voltage and current parameters for various battery types like LiFe, LiPo, NiMH.
Explains how to use the 'Scrapped function' to discharge a battery to 0V.
Describes the DC Power function, acting as a power supply with adjustable voltage and current.
Explains minimum input voltage protection (10-24V) and its behavior in AC/DC modes.
Describes maximum input power setting (30-230W) for stable operation in DC mode.
General| Max Charge Power | 200W |
|---|---|
| Operating Temperature | 0-40°C |
| Storage Temperature | -20-60°C |
| Input Voltage | AC 100~240V |
| Output Voltage | 1-30V |
| Charge Current | 0.1~8.0A |
| Discharge Current | 0.1-1.5A |
| Balancing Current | 500mA |
| Supported Battery Type | LiPo, LiFe, NiMH, NiCd, Pb |
| Display | 2.4\" 320x240 LCD |
| Cooling | Built-in fan |
| Interface | XT60 |
| Cell Count | 1-6S (LiPo/LiFe/Li-ion) |
To Next Page
