ISDT T8 - Page 16

27
In standby, long press to enter system setting.
Language
Firmware Sharing
System Information
System self-checking
Volume
Completion Tone
Backlinght
Max.input power
Min.input voltage
BattGO
BattGO
Back
Support up to 7 languages
By using ISDT sclinker, user can share firmware to same model.
Show firmware version
To check hardware is working properly
Beeper volume adjustment, high, middle low and off
Single time or multiple time(1 time/ min)
Back light adjustment, high, middle , low and auto
Input power range (T6 Lite)50-660W (T6)50-858W (T8)50-1100W
Input voltage range(T6 Lite/T6)8-32V (T8)12-40V
Input connecting to BattGo battery, Storage, charge/discharge parameters could be adjusted.
Output connecting to BattGo battery, Storage, charge/discharge parameters could be adjusted.
Exit system menu
System Default