To Next Page
D
danielpopeSep 6, 2025
What to do if the clutch won’t disengage on an Iseki TG5470?
- HhenrydunnSep 6, 2025
If your Iseki Tractor clutch won’t disengage, adjust the free-play.
What to do if the clutch won’t disengage on an Iseki TG5470?
If your Iseki Tractor clutch won’t disengage, adjust the free-play.
What to do if my Iseki TG5470 Tractor does not move forward or reverse?
If your Iseki Tractor isn't moving, first, ensure the range shift lever is not in the 'Neutral' position; shift it to another position. If the issue persists, it could be due to a blown fuse, defective controller, hydraulic system, or wiring/sensors. In this case, stop the engine and consult your dealer.
Why does the sound of the horn not stop when starting the Iseki TG5470 engine?
If the horn continues to sound when starting your Iseki Tractor, it could be due to a blown fuse, defective controller, defective hydraulic system, or issues with the wiring or sensors. Stop the engine and consult your dealer for assistance.
What to do if the sound of the horn does not stop when Iseki Tractor traveling?
If the horn doesn't stop sounding while your Iseki Tractor is moving, it could be due to a blown fuse, a defective controller, a problem with the hydraulic system, or faulty wiring/sensors. Depress the brake pedal to slow down and stop the engine, then consult your dealer.
What to do if the oil pressure monitor is lit during Iseki TG5470 operation?
If the oil pressure monitor is lit during operation of your Iseki Tractor, you should first replenish the oil. If that doesn't solve the problem, replace the oil with oil of proper viscosity. If the issue persists, replace the oil filter element cartridge or consult your dealer.
What to do if a function will not operate on an Iseki TG5470 Tractor?
If a particular function on your Iseki Tractor will not operate, replace the component. Check the fuse and replace it if necessary. Inspect the ground points and terminals, cleaning them if needed, and replace any other required parts.
Why can't I charge the battery on my Iseki TG5470 Tractor?
If the battery of your Iseki Tractor cannot be charged, check the fuse and replace it if necessary. Correct any loose or dirty terminals, short circuits, or poor grounding. Ensure the belt has proper tension, adjusting or replacing it as needed. Also, correct any loose terminal connections, corrosion, or electrolyte level issues.
Why are the head lamps dim on my Iseki Tractor?
If the head lamps on your Iseki Tractor are dim, charge the battery and check the charging system. Also, check the ground points and terminals, and clean and tighten them.
How to fix a clutch that slips on an Iseki Tractor?
If your Iseki Tractor clutch slips, adjust the free-play.
Why don't the brake pedals return smoothly on my Iseki TG5470?
If your Iseki Tractor's brake pedals do not return smoothly, replace any broken springs. If there are no broken springs, remove any rust and then lubricate the brake pedal mechanism.
General
