Iseki TM3245 - Clutch Free-Play Adjustment

LUBRICATION & PERIODIC MAINTENANCE
81
• 7-pin Trailer Socket D
NOTE: A special fuse is used-use only genuine ISEKI
parts.
CLUTCH FREE-PLAY ADJUSTMENT
FIG. 147 & 148: Check clutch pedal free-play regularly
and adjust as necessary. Correct clutch pedal free-play
A is 20 to 30 mm (7 / 8 to 1-1 / 8”) when measured at the
end of the pedal, 1, as shown.
NOTE: Through use, clutch free-play will be reduced.
IMPORTANT: Correct free-play must be maintained to
reduce wear on the clutch and release
bearing, and allow complete disengage-
ment when the pedal is depressed.
To adjust clutch pedal free-play, locate the linkage under
the left foot step, and loosen the lock nut, 2. Adjust the
turnbuckle, 3, on the linkage until free-play is correct.
Lengthening the linkage will increase free-play, shorten-
ing the linkage will reduce free-play.
Secure by retightening the lock nuts.
1
22 3
FIG. 147
FIG. 148