Isel iMC Series - 6 Software; Installing Setup Software

iMC-B / iMC-V Operating Instruction
page - 18
6 Software
6.1 Installing setup software
Setup / initial operation of the integrated power amplifiers inside the controller’s iMC-
B, iMC-V and iMC-VP takes place by the following setup software
DCSetup.exe (1)
for:
- BDC-servo-motors (brushed-DC-servos) with motor power
amplifiers iMD10
or
ACSetup.exe (2)
for:
- BLDC-servo-motors (brushless-DC-servos) with motor power
amplifiers iMD20
Do the following steps to install setup software additional:
1. Connect ProNC/Remote install medium (delivered CD or USB stick) with the
control computer.
2. Following Auto-start-window will be shown (when installing from CD):
If Auto-Start-window is not shown start the Windows Explorer
and open the root directory of the CD/DVD- or USB-drive.
Double click on the file “Autorun.exe“.