Isel LES4 - Technical Data; Mechanical Data and Dimensions; Fig. 6 - LES 6 with Belt Drive Module or Prepared for Direct Drive; Fig. 7 - Ordering Key LES 6

LES
4, 5, 6
- 234xxx xxxx
21 / 62
Assembly instruction
Design variants LES 6
Fig. 6 - LES 6 with belt drive module or prepared for direct drive
Ordering key LES 6
Fig. 7 - Ordering key LES 6
2.4 Technical data
2.4.1 Mechanical data and dimensions
2.4.1.1 Linear unit LES 4
Linear unit LES 4
Unit
Value
Aluminium profile WxH
mm
75 x 75
Profile lengths
mm
290 - 2990
1
Material
AIMgSiO, 5F22
Anodizing
E6/EV1
Spindle pitch
mm
2.5 / 4 / 5 / 10 / 20
Repeat accuracy
mm
0.02
Moment of inertia l
x
cm
4
107.711
Moment of inertia l
y
cm
4
125.843
Focus
mm
33.23
1
Standard grid dimensions 100mm