Improper lifting of the linear unit
If you do not lift the linear unit correctly, damage may occur due to deflection!
If you do not lift the linear unit correctly, injuries to the musculoskeletal system may occur
due to incorrect lifting!
˃ Find out about the weight of the unit.
˃ Please observe the DGUV and BG instructions for the correct carrying and lifting of loads.
˃ Avoid long transport distances after lifting. If necessary, use a transport table or place the
unit on a pallet to transport it further with a suitable industrial truck.
The following specifications should be observed:
● Lifting by one person:
- max. ≤ 20 kg and/or max. ≤ 1000mm length.
- Encompassing the unit with two hands, with maximum distance between the right and left hand.
● Lifting by two persons:
- max. ≤ 40 kg and/or max. ≤ 2000mm length.
- Encompassing the unit with two hands, with maximum distance between the right and left hand.
- Encompassing the unit at the beginning and end of the last third to prevent the unit from bending in the
middle.
● Lifting by several persons:
- max. ≤ 60 kg und/oder max. ≤ 3000mm Länge.
- Encompassing the unit with two hands, with maximum distance between the right and left hand.
- Encompassing the unit at the beginning or end of the last third and in the middle to prevent the unit from
bending in the middle.
To Next Page
Loading...